Description
Mpower Set 2 Tenoner.
The Mpower Tenoner SET 2 machine is designed and built to withstand continuous use.
It’s cast iron base ,column and slide ways provide a ridged and durable mainframe assembly ,and the high output motors supply ample power, 2.2 KW 3 Phase .
The large ground cast iron sliding table slides easily on its ball race supported wheels ,and cutterhead slide movements are smooth and easily adjustable on dovetail slides.
Extremely versatile and taking only minutes to set up , the MPower SET 2 Tenoner is easy to use and accurate in operation.
Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action lever.
Its end is then passed between 2 vertically mounted cutter heads which machine the top and bottom cheeks of the tenon.
The tenon width is set by raising or lowering the top motor,and its position on the timber by raising or lowering the two motors in tandem.
Variations in shoulder length are set using the rule on the end stop and staggered tenons are achieved by simple handwheel adjustment of the top motor, with digital counters to help the measurements.
Each cutting head has provision for profile knives to enable the cross section of the components being jointed to be matched.
Technical
Motor 2.2Kw 3 phase
Timber capacity 130 x 310mm
Timber capacity with fence at 45 degrees 130 x 250mm
Max. length of tenon 155mm
Max. length of tenon – 2 passes 205mm
Vertical adjustment of bottom cutter block 0 to 60mm
Vertical adjustment of top cutter block 0 to 120mm
Horizontal adjustment of top cutter block /-32mm
Table size 800 x 310mm
Table working height 860mm
Main Cutter heads 175 x 60 x 30mm
This machine is in good condition and ready for work.
**WAS £2,750.00 + VAT Now £2,250.00 + VAT**
Delivery available at extra cost.