Sedgwick TESH 3 Head Tenoner from Grovewood Machines an official Sedgwick Dealer.
The TESH 3 Head Tenoner is from the well known UK manufacturer Sedwick, the country’s largest manufacturer of classical woodworking machines. The Sedgwick TESH 3 Head Tenoner comes with
3 Heads, Scribe Head, Mechanical Readouts to movements and is Three Phase but can be supplied as Single Phase if required (call for more information 01256 818235).
Ease of operation
Taking only minutes to set up, the Sedgwick TE/TESH is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor, again reading from a rule.
Each cutting head has provision for profile knives to enable the operator to match the cross section of the components being jointed. Alternatively the optional scribing head provides improved accuracy, ease of setting, and finish. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles are all possible on this versatile machine. Combinations of 90 degree and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction.
The Sedgwick TE/TESH is designed and built to withstand continuous production use. Its cast iron base, column and slideways provide a rigid and durable mainframe assembly, and the 2.2Kw motors supply ample power. The generously proportioned cast iron sliding table is mounted on bearing equipped hardened steel rollers for minimum wear, and cutterhead slide movements are easily adjusted on dovetail slides for ease of maintenance.
The TE/TESH offers all of these safety features as standard:
- Automatic braking
- Starters with thermal overload, no volt release protection and lock off emergency stop switch.
- High performance lightweight cutter blocks with chip limiting devices
- Large diameter dust extraction outlets
- One piece front cutter guard
- Front & rear table guards
TIMBER CAPACITY 130 x 310 mm
TIMBER CAPACITY WITH FENCE @ 45 130 x 250 mm
MAXIMUM LENGTH OF TENON 155 mm
MAX. LENGTH OF TENON 2 PASSES 205 mm
VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK 0 – 60 mm
VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK 0 – 120 mm
HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK +/- 32 mm
TABLE SIZE 800 x 310 mm
TABLE WORKING HEIGHT 860 mm
MAIN CUTTERHEADS 2 x 175 x 60 mm
DUST EXTRACTION OUTLETS 2 x 150 mm
This machine is in Stock and ready for collection or Delivery (extra cost).
£5,690.00 + VAT.